Hey guys! It’s time for our second update
on the aliens power loader build. In the last episode we talked about the design
and started plasma cutting the steel for the first arm.
Let’s finish cutting those pieces, go shopping from some hydraulic parts, get
it assembled, welded and then well we can do our first hydraulics test. Oh, and
don’t forget to follow us on social media @TheHacksmith for real-time
updates on our projects. Alright, this plate of steel weighs 600lbs,there’s only two fo us here, so hopefully we don’t die. What are you doing there Bogdan? So now we’re
exploring all the remaining DXF for the three-eighths steel, and then we’ll be able to
start welding then we’ll be welding forever! I just have to make sure that all of these don’t intersect. So we forgot the mounting holes for the
cover plates, so we brought them back in the software,
but we also had to re-zero the machine because it ran into the cupboards so hopefully it’s gonna work That is the bicep of the power loader! Bicep number two! Why do you want me to carry it? Here, you’re the one who goes to the gym. So we got our motor, the weakest of all the options.
James: Yes, but it comes with a remote and a valve Bank built-in, it’ll be
useful for future hydraulic projects that we can still use this for. And we got the fluid, got a bigger reservoir cuz that is tiny, got our two
cylinders and our final solenoid valve. You happy Bogdan?
Bogdan: No, I wanted the bigger motor. This is only $1,500 worth of stuff for
testing. One arm! First came here back in 2007. Yeah that’s $500 steel now. Look at all this steel! Oh god. You gotta use physics! This is the bicep hydraulic cylinder! It can put out 30,000 lbs! 20 L of hydraulic fluid! As you can imagine, building a giant hydraulic power loader from aliens is a pretty expensive
endeavor. I believe that shopping trip alone was
well over $1,000 by itself and that wasn’t even all the parts we need,
because of that we’re super grateful for our sponsors who enable us to take on
these engineering challenges in order to make awesome videos for you guys! This
video sponsor is world of warships who helped make building this arm possible.
world of warships is a free to play online game that takes wit and expert
strategy to dominate the seven seas, it’s the perfect balance between both action
and strategy which really makes it a thinking man’s action game. You get to
command a massive naval fleet with some of history’s most iconic war vessels.
With changing weather and over 30 million players worldwide no two
missions will ever be alike, what I like most about the game is the attention to
detail the game models are super accurate because they actually base them
off of real-life 3d scans of the ships and with over 200 ships from 11 nations
there are so many different ways to play updates are constant which ensure new
experiences new missions game updates and special events. Play today using my
link below in the code playlangley2019 and you’ll receive 1 million credits, the
premium USS Langley aircraft carrier, 3 days premium time and more. The aircraft
carrier allows for a completely different form of fast-paced world of
warships gameplay. Plus by downloading it you ensure our channel can afford to
keep building this massive power loader! This bushing is a little tight so I’m going
to fix it. That’s better. I need a little bit more off of that. And that’s the wrist joint! As long as I got my tolerances this should
just fit into place. Why do we make such heavy projects! All right it’s time to look at some of
the hydraulics for the power loader. Now, funny enough my first job out of engineering
school was actually designing hydraulic systems for injection molding machines
for a company called Athena automation so I have actually done some of this stuff
before a long time ago but I’ve never actually assembled it myself so this should
be interesting. Right now we’ve got our manifold block
which we can connect three closed Center directional control valves to and
basically we’re able to control up to three cylinders from this block so I’ve
got all these fittings which I mean to put in there which then can connect to these
hoses and then we can connect everything together with our pump and hypothetically move
some oil around. Okay so we can tighten this guy in. It’s
quite tight! That is snug! Let’s see what this looks like. So for testing we got some
pre-made hydraulic hoses standard lengths this one’s three feet long I got
some four foot long ones when we finalized the design
we’ll get custom length hydraulic hoses Okay next cylinder! All mechanical portions are done now which means can do a test-fit
and potentially test the hydraulics. So Bogdan, you and me will lift and Ben can hopefully
line it and this is the tricky part And this is the tricky part we have to put the valves on the inside
of the arm, attached to this manifold block. Fits pretty slick! All right so we got the valve
bank installed now we just have to add in the wires I’m just gonna install all of these plugs. All right so all the
fittings in the manifold block are tight now which means when we add the hoses we
just have to tighten those ones, but this is the evidence of me saying everything is
tight so hopefully nothing bad happens. That’s how engineering is done! okay so we got a pressure gauge, we got some manifold connected to the hydraulic
pumps, we have one remote right here the pump has a built-in two-stage valve
bank, so pressuring one-way pressure out the other. We’ll just be doing one way because we’re adding pressure here and then we’re using these valve banks that then control the ends of the cylinders. And because they’re close center we only have to
attach four hoses you just have never press the other button. Don’t press the button! Now, whatever you do don’t push
this button okay. No! That’s the button that will kill
everyone! First time using hydraulics! Let the record state this was
Bogdan idea to extend the cylinder before attaching the arm. So! Pressing
this button turns the pump on. Alright this is still not great but
everything else is alright. It’s not gonna crash into itself right? Alright so this arm can curl… It curls
around six to eight thousand pounds so that means we actually hold a six
thousand pound barbell right here. That’s more than a car weighs so with both arms
we should actually be able to flip or lift a car. Well, after a week of work-
James: It wasn’t even a week. Friday
Saturday we built this in five days! I didn’t think we could do it! Everything
works which means we have to take it apart again, clean it up a little bit
more, paint it, drill some more holes then we can put it back together again and
then it’s done for now until we build the other one and then we build the body.
Bogdan: Knowing how much work and effort went into this and just not even, like, building
it. Just assembling it. Just putting everything on while it’s super heavy and
really cumbersome.
James: It took two hours just assembling two hours of footage for the editors to go through. Oh yeah, this is a temporary test hydraulic system that’s why it’s so slow it’s just
so we can test to make sure the hydraulics work in the end we’re
probably gonna actually have like a gas engine on the back of the mech and it
will have a much higher flow rate so the arm should actually be like… Alright, that’s the end of whatever part of the video Alright it’s really starting to
come together. So like I said last video we’re gonna be releasing one video
on the series per month going into a little bit more detail on the project
than we normally do for our videos it is an extremely big project so we’re gonna
do our best to stay ahead on this project to ensure you guys get
consistent updates once a month but if you’re dying to see more make sure you
follow us on Instagram where we post real-time updates as we work on the
project in part three we’ll be painting reassembling the arm and doing our first
real hydraulics tests including lifting people after that it’ll be a video on
our jaws of life the claws of this bad boy that will be able to crush
xenomorph skulls! Make sure you subscribe this is our
biggest and best project yet. Plus I’ve got quite a bit of reading to do…


  1. Notice what shirt I'm wearing in the beginning…? FLYING LIKE IRON MAN RETURNS NEXT WEEK!

    Oh, and follow us on Instagram to see some stuff Flying like Iron Man stuff NOW!

  2. I know this is not my bill but boxing things in at a 3/8 that's a bit heavy you probably could have got away with quarter-inch in some cases even a 1/8 inch I can understand the body being a little thicker or even towards the legs where you need the weight you're making this thing top-heavy I believe but I don't know I haven't seen the plans I don't know how have you're going to make the feet and legs

  3. Did you guys figure out how many gallons per minute those Motors are flowing in the size of those Rams you could have got away with some smaller cylinders than that

  4. Love this project (new subscriber); but I think you are going to have major issues when it comes to movement and balance, especially with any kind of load. You might want to consider being able to 'set your ass back (and down)' to counter-balance any load and also that actual tracks might make much more sense than trying to take steps, big feet with tracks might make life much simpler in the latter stages of the build/testing. Maybe you guys are waay ahead of me, I can't wait to see!

    Massive respect…

  5. Dude complains about 1500 in steel. Gimme a break. Your 6.5 million subs is paying for that buddy. And sponsers

  6. I have ran lasers for a living since I was 17 and I always wished I had one because I had so many cool projects that I would like to do and so many cool parts that I always wanted to build for my bike and I got to accomplish some of the smaller ones because I was actually the Prototype guy / Lead man in the later years so I had access to AutoCAD and SolidWorks and the Machine itself LOL. So I did get to use it to make some pretty awesome motorcycle parts from time to time. Very briefly I had a small business on the side where I was selling Target gongs made from a572 armor plate before that was a big thing all of these gun accessory company started doing it

  7. Too bad you can't partner with Boston Robotics, for a possible engine platform and stabilization with gyros.-Just a thought.

  8. I work on CNC machines (Shopbots) and I was like, "There's no way that they're gonna have a perfect run, first go" and then the ground clamp episode happened and I just said, "There it is."

  9. I can't wait to see this completed build… talk about childhood dreams coming true!!! Its totally impractical as stated but just to see it actually built and operational in real life makes it all worth it!!!

  10. If someone pissed you off you could flip that homo's minivan like you were flicking a bumble bee ๐Ÿ˜๐Ÿ˜‚๐Ÿ’€ I'll steer clear of insulting you because I don't want to end up regretting what I said ๐Ÿ˜˜

  11. Removing those heavy plates you should use a heavy-duty electromagnet with a long handle so two people can pick it up easier so you don't hurt yourselves

  12. I canโ€™t make a lego, or Minecraft titanic even if I had 10 Years and your over here building the aliens robot thing!?!?!?!

  13. I can imagine, how many times you failed building the first arm.
    ๐Ÿ‘๐Ÿ‘๐Ÿ‘๐Ÿ‘ It isn't that easy man…!!!
    Eagerly awaiting for your next updates.

  14. I have worked in many kinds of metal shops and it appears you need a "vise" to assist in assembly. Great videos !

  15. This is so cool I barely have a clue whatโ€™s going on Iโ€™m about to go into 11th grade systems engineering over here in Australia

Leave a Reply

Your email address will not be published. Required fields are marked *